Stihl MSE 210 C-BQ Instruction Manual - Page 46

English Cutting Attachments Recommended cutting attachments conforming with the 45 degree computed kickback angle requirement of Section 19.108 of UL 60745-2-13 when used on this model chain saw (see the chapter on "Safety Precautions and Working Techniques"): Rollomatic E guide bars Reduced kickback STIHL guide bars (with green label) Bar lengths: 30, 35, 40 cm (12, 14, 16 in.) Pitch: 3/8" P (9.32 mm) Groove width: 1.3 mm (0.050 in) Sprocket nose: 9-tooth Actual cutting length will be less than listed bar length. Saw chain 3/8" P Low kickback STIHL saw chain (with green label) Picco Micro 3 (63 PM3) Type 3636 Picco Duro 3 (63 PD3) Type 3612 Pitch: 3/8" (9.32 mm) Drive link gauge: 1.3 mm (0.050 in) Chain sprocket 7-tooth for 3/8" P(spur sprocket) To comply with the 45 degree computed kickback angle requirement of Section 19.108 of UL 60745-2-13 (and Section 5.11 of ANSI/OPEI B175.1-2012), use replacement saw chains listed above or elsewhere by STIHL as conforming with those requirements when used on this model chain saw or use saw chains classified as "low kickback" in accordance with ANSI/OPEI B175.1-2012. Since new bar/chain combinations may be developed after publication of this Manual, ask your STIHL dealer for the latest STIHL recommendations. Special Accessories Contact your STIHL dealer for information regarding special accessories that may be available for your product. 44 MSE 170 C, MSE 210 C