Synology SA3200D Synology High Availability SHA User Guide for DSM 7.0 - Page 13
Static IP., administrators, Do not use a DHCP IP
View all Synology SA3200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Chapter 3: Set Up and Configure an SHA Cluster 11. Enter the credentials of an account belonging to the administrators group for the passive server. Click Next. 12. Specify a name for the high-availability cluster and the IP address that you will use to access the cluster. The cluster IP must be in the same subnet as both servers and must be a Static IP. Do not use a DHCP IP. Click Next when you're done. We used the following name and IP address for example: • Cluster Hostname: NAS-HA • Cluster Static IP address: 10.17.196.14 13. The wizard will check if your system meets the requirements. Click Next once the verification is complete. 14. Confirm your settings and click Done. 15. Tick the checkbox after reading the instructions and click Yes. 16. The wizard will start creating the high-availability cluster. The time needed varies depending on your environment. • During the cluster creation process, do not power off the active server or the passive server. If a power failure occurs during the cluster creation process, the cluster will fail to be created. 17. Once the process is complete, you can access the data and services via the new cluster hostname and IP address. 11