TP-Link AC2300 Archer C2300EU V1 User Guide - Page 69
Use OpenVPN to Access Your Home Network, 13. 1. 1. Step1. Set up OpenVPN Server on Your Router - range
View all TP-Link AC2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Chapter 13 VPN Server 13. 1. Use OpenVPN to Access Your Home Network In the OpenVPN connection, the home network can act as a server, and the remote device can access the server through the router which acts as an OpenVPN Server gateway. To use the VPN feature, you should enable OpenVPN Server on your router, and install and run VPN client software on the remote device. Please follow the steps below to set up an OpenVPN connection. 13. 1. 1. Step1. Set up OpenVPN Server on Your Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Server > OpenVPN, and select Enable VPN Server. Note: • Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for router's WAN port and synchronize your System Time with internet. • The first time you configure the OpenVPN Server, you may need to Generate a certificate before you enable the VPN Server. 3. Select the Servive Type (communication protocol) for OpenVPN Server: UDP, TCP. 4. Enter a VPN Service Port to which a VPN device connects, and the port number should be between 1024 and 65535. 5. In the VPN Subnet/Netmask fields, enter the range of IP addresses that can be leased to the device by the OpenVPN server. 65