TP-Link EAP115 EAP115EU V1 User Guide - Page 31
WPA-Enterprise, WPA-PSK
View all TP-Link EAP115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Modify: Click to open the page to edit the parameters of SSID. Click to delete the SSID. Following is the detailed introduction of security mode: WEP, WPA-Enterprise and WPA-PSK. WEP WEP (Wired Equivalent Privacy), based on the IEEE 802.11 standard, is less safe than WPAEnterprise or WPA-PSK. NOTE: WEP is not supported in 802.11n mode. If WEP is applied in 802.11n mode, the clients may not be able to access the wireless network. If WEP is applied in 11b/g/n mode (in the 2.4GHz frequency band), the device may work at a low transmission rate. Figure 6-14 Security Mode_WEP Type: Select the authentication type for WEP. Auto: The default setting is Auto, which can select Open System or Shared Key automatically based on the wireless station's capability and request. Open System: After you select Open System, host in the wireless network can pass the authentication and associate with the wireless network without password. However, correct password is necessary for data transmission. Shared Key: After you select Shared Key, host in the wireless network has to input password to pass the authentication, or it cannot associate with the wireless network or transmit data. Key Selected: You can configure four keys in advance and select one as the present valid key. Web Format: Key Select the web key format ASCII or Hexadecimal. ASCII: ASCII format stands for any combination of keyboard characters in the specified length. Hexadecimal: Hexadecimal format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length. Key Type: Select the WEP key length (64-bit, or 128-bit, or 152-bit) for encryption. 64-bit: You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F without null key) or 5 ASCII characters. 23