TP-Link EAP225-Wall Omada Controller Software 3.1.13 User Guide - Page 106
Reboot Schedule, 3.8.4 Log Settings, Apply, Site Settings > Reboot Schedule., Daily, Weekly
View all TP-Link EAP225-Wall manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
2. Specify a new username and password for the EAPs. 3. Click Apply. Note •• The new account will be applied to EAPs but not the Omada Controller. To change the Omada Controller's username and password, please refer to User Account. •• Device account can be only viewed and changed when you log in to the controller as the administrator. While the operator and observer accounts do not have the permission. 3.8.3 Reboot Schedule You can reboot all the EAPs in the network periodically as needed. Follow the steps below to configure Reboot Schedule. 1. Go to Site Settings > Reboot Schedule. 2. Check the box to enable the function. 3. Choose Daily, Weekly or Monthly in the Timing Mode drop-down list and set a specific time to reboot the EAPs. 4. Click Apply. 3.8.4 Log Settings Follow the steps below to choose the way to receive system logs. 100