TP-Link EAP225-Wall Omada Controller Software 3.1.13 User Guide - Page 128
WLANs, 5.4.6 LED, Use VLAN ID, Apply
View all TP-Link EAP225-Wall manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
RSSI Threshold Enable this function and enter the threshold of RSSI (Received Signal Strength Indication). When the clients' signal is weaker than the RSSI Threshold you've set, the clients will be disconnected from the EAP. 5.4.5 WLANs You can specify a different SSID name and password to override the previous SSID. After that, clients can only see the new SSID and use the new password to access the network. Follow the steps below to override the SSID. 1. Select the WLAN group. 2. Click and the following window will pop up. 3. Check the box to enable the feature. 4. You can join the overridden SSID in to a VLAN. Check the Use VLAN ID box and specify a VLAN ID. 5. Specify a new name and password for the SSID. 6. Click Apply to save the configuration. 5.4.6 LED You can change the LED status of each EAP. 122