Home » TP-Link Manuals » Networking » TP-Link EAP225-Wall » Manual Viewer

TP-Link EAP225-Wall Omada Controller Software 3.1.13 User Guide - Page 51

Con Advanced Wireless Parameters, Apply, Fast Roaming, Beacon Interval, Period

View all TP-Link EAP225-Wall manuals

Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

SSID Broadcast Wireless VLAN Wireless VLAN ID Access Control Rule Rate Limit Download Limit Upload Limit 6. Click Apply. With the option enabled, EAPs will broadcast the SSID to the nearby hosts, so that those hosts can find the wireless network identified by this SSID. If this option is disabled, users must enter the SSID manually to connect to the EAP. The option is enabled by default. With this option enabled, the EAP can work together with the switches supporting 802.1Q VLAN. Traffic from the clients in different wireless networks is added with different VLAN tags according to the VLAN settings of the wireless networks. Then the wireless clients in different VLANs cannot directly communicate with each other. To set a wireless VLAN for the wireless network, enable the option and set a VLAN ID in the Wireless VLAN ID. Enter a VLAN ID for the wireless VLAN. Wireless networks with the same VLAN ID are grouped to a VLAN. The value ranges from 1 to 4094. Select an Access Control rule for this SSID. For more information, refer to Access Control. With this option enabled, the download and upload rate of each client which connects to the SSID will be limited to balance bandwidth usage. You can limit the download and upload rate for some specific clients by configuring rate limit in client list, refer to Manage Clients in the Action Column to get more details. Note that the download and upload rate will be limited to the minimum of the value configured in SSID, client and portal configuration. With Rate Limit enabled, specify the limit of download rate. 0 means unlimited. With Rate Limit enabled, specify the limit of upload rate. 0 means unlimited. 3.1.2 Configure Advanced Wireless Parameters Proper wireless parameters can improve the network's stability, reliability and communication efficiency. The advanced wireless parameters consist of Fast Roaming, Beacon Interval, DTIM Period, RTS Threshold, Fragmentation Threshold and Airtime Fairness. To configure the advanced wireless parameters, follow the steps below. 1. Go to Wireless Settings > Advanced Wireless Setting. 45

Section	Page
1 Quick Start	7
1.1 Determine the Network Topology	8
1.1.1 Management on the local Network	8
1.1.2 Management via Cloud Access	10
1.2 Install Omada Controller Software	11
1.2.1 Installation on Windows Host	11
1.2.2 Installation on Linux Host	11
1.3 Inform the EAPs of the Controller Host's Address	13
1.4 Start and Log In to the Omada Controller	14
1.4.1 Launch Omada Controller	14
1.4.2 Do the Basic Configurations	15
1.4.3 Log In to the Management Interface	18
1.5 Create Sites and Adopt EAPs	18
1.5.1 Create Sites	19
1.5.2 Adopt the EAPs	21
1.6 Monitor and Manage the EAPs	22
2 Monitor and Manage the Network	24
2.1 View the Statistics of the Network	25
2.1.1 View the Client Distribution on SSID	25
2.1.2 Have a Quick Look at EAPs and Clients	25
2.1.3 View Current Usage-Top EAPs	26
2.1.4 View Recent Activities	26
2.2 Monitor the Network with the Map	27
2.2.1 Add a Map	27
2.2.2 Monitor the EAPs on the Map	30
2.3 Monitor and Manage the EAPs	31
2.3.1 Manage the EAPs in Different Status	31
2.3.2 View the Detailed Information of EAPs	32
2.3.3 Manage the EAPs in the Action Column	32
2.4 Monitor and Manage Clients	34
2.4.1 View the Current Information of Clients	34
2.4.2 Manage Clients in the Action Column	34
2.5 View Clients Statistics During the Specified Period	35
2.5.1 Select a Specified Period	35
2.5.2 View the History Information of Clients	36
2.5.3 Manage Clients in the Action Column	36
2.6 Manage the Rogue APs List	36
2.6.1 Manage the Untrusted Rogue APs List	37
2.6.2 Manage the Trusted Rogue APs List	37
2.7 View Past Guest Authorization	38
2.8 View Logs	38
3 Configure the EAPs Globally	40
3.1 Wireless Network	41
3.1.1 Add Wireless Networks	41
3.1.2 Configure Advanced Wireless Parameters	51
3.1.3 Configure Band Steering	53
3.1.4 Configure Mesh	54
3.2 Access Control	59
3.3 Portal Authentication	60
3.3.1 No Authentication	61
3.3.2 Simple Password	65
3.3.3 Local User	69
3.3.4 Voucher	77
3.3.5 SMS	84
3.3.6 Facebook	89
3.3.7 External RADIUS Server	90
3.3.8 External Portal Server	96
3.4 Free Authentication Policy	97
3.5 MAC Filter	98
3.6 Scheduler	100
3.7 QoS	102
3.8 Site Settings	105
3.8.1 LED	105
3.8.2 Device Account	105
3.8.3 Reboot Schedule	106
3.8.4 Log Settings	106
3.8.5 Batch Upgrade	108
3.8.6 SSH	110
3.8.7 Management VLAN	111
4 Omada Cloud Service	112
4.1 Configure the Cloud Access	113
4.1.1 Enable Cloud Access	113
4.1.2 Manage the Cloud Users	113
4.2 Manage the Controller via Omada Cloud	115
4.2.1 Access the controller via Omada Cloud	116
4.2.2 Change your TP-Link ID information	118
5 Configure the EAPs Separately	119
5.1 View the Information of the EAP	120
5.1.1 Active Channel Information	120
5.1.2 Overview	121
5.1.3 LAN	121
5.1.4 Radio	122
5.2 View Clients Connecting to the EAP	122
5.2.1 User	122
5.2.2 Guest	123
5.3 View Mesh Information of the EAP	123
5.3.1 Uplinks	123
5.3.2 Downlinks	124
5.4 Configure the EAP	124
5.4.1 Basic Config	124
5.4.2 IP Setting	125
5.4.3 Radio	126
5.4.4 Load Balance	127
5.4.5 WLANs	128
5.4.6 LED	128
5.4.7 Trunk Settings (Only for EAP330)	129
5.4.8 Rogue APs Detection	129
5.4.9 Local LAN Port Settings (Only for EAP115-Wall and EAP225-Wall)	130
5.4.10 Forget this AP	130
6 Manage the Omada Controller	131
6.1 User Account	132
6.2 General Setting	133
6.2.1 Configure Controller Name	133
6.2.2 Configure Mail Server	133
6.3 History Data Retention	135
6.4 Backup&Restore	136
6.5 Auto Backup	136
6.6 Migrate	139
6.6.1 Controller Migrate	139
6.6.2 Site Migrate	143
6.7 Information About the Software	147
7 Application Example	148
7.1 Basic Configuration	149
7.2 Advanced Settings	149
7.2.1 Monitor the EAPs with Map	149
7.2.2 Configure Portal Authentication	150
7.2.3 Create a SSID for the Employees	152
7.2.4 Configure Scheduler	153
Appendix: Omada App	155
1 Install Omada App on the Mobile Device	156
2 Manage your Network in Standalone Mode	156
3 Manage your Network in Controller Mode	159
3.1 Locally manage your EAPs using the Omada App	159

Match case Limit results 1 per page

SSID Broadcast

With the option enabled, EAPs will broadcast the SSID to the nearby hosts, so

that those hosts can find the wireless network identified by this SSID. If this

option is disabled, users must enter the SSID manually to connect to the EAP.

The option is enabled by default.

Wireless VLAN

With this option enabled, the EAP can work together with the switches

supporting 802.1Q VLAN. Traffic from the clients in different wireless networks

is added with different VLAN tags according to the VLAN settings of the

wireless networks. Then the wireless clients in different VLANs cannot directly

communicate with each other.

To set a wireless VLAN for the wireless network, enable the option and set a

VLAN ID in the

Wireless VLAN ID

Enter a VLAN ID for the wireless VLAN. Wireless networks with the same VLAN

ID are grouped to a VLAN. The value ranges from 1 to 4094.

Access Control Rule

Select an Access Control rule for this SSID. For more information, refer to

Access Control

Rate Limit

With this option enabled, the download and upload rate of each client which

connects to the SSID will be limited to balance bandwidth usage. You can limit

the download and upload rate for some specific clients by configuring rate limit

in client list, refer to

Manage Clients in the Action Column

to get more

details.

Note that the download and upload rate will be limited to the minimum of the

value configured in SSID, client and portal configuration.

Download Limit

With Rate Limit enabled, specify the limit of download rate. 0 means unlimited.

Upload Limit

With Rate Limit enabled, specify the limit of upload rate. 0 means unlimited.

6. Click

Apply

3.1.2

Configure Advanced Wireless Parameters

Proper wireless parameters can improve the network's stability, reliability and communication

efficiency. The advanced wireless parameters consist of

Fast Roaming

Beacon Interval

DTIM

Period

RTS Threshold

Fragmentation Threshold

and

Airtime Fairness

To configure the advanced wireless parameters, follow the steps below.

Go to

Wireless Settings > Advanced Wireless Setting