TP-Link EAP225-Wall Omada Controller Software 3.1.13 User Guide - Page 69
Local User, Con Local User Portal
View all TP-Link EAP225-Wall manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Configure the following parameters: Advertisement Specify whether to enable the Advertisement feature. With this feature enabled, you can add advertisement pictures on the authentication page. These advertisement pictures will be displayed before the login page appears. You can also allow users to skip the advertisement by enabling Allow Users To Skip Advertisement. The advertisement picture should be less than 2MB. And only JPG, PNG, BMP, GIF and JPEG file types are supported. Picture Resource Upload advertisement pictures. When several pictures are added, they will be played in a loop. Advertisement Duration Time Specify how long the advertisement will be displayed for. For this duration, the pictures will be played in a loop. If the duration time is not enough for all the pictures, the rest will not be displayed. Picture Carousel Interval Specify the picture carousel interval. For example, if this value is set as 5 seconds, the first picture will be displayed for 5 seconds, followed by the second picture for 5 seconds, and so on. Allow Users To Skip Advertisement Specify whether to enable this feature. With this feature enabled, the user can click the Skip button to skip the advertisement. 5. Click Apply. 3.3.3 Local User With this Local User configured, clients are required to enter the correct username and password of the login account to pass the authentication. You can create multiple accounts and assign different accounts for different users. Configure Local User Portal Follow the steps below to configure Local User Portal: 1. Go to Wireless Settings > Basic Wireless Settings and create an SSID for the Portal. 2. Go back to the Portal configuration page. In the Basic Info section, complete the basic settings for the portal authentication. 63