TP-Link EAP225-Wall Omada Controller Software 3.1.13 User Guide - Page 130
Local LAN Port Settings (Only for EAP115-Wall and EAP225-Wall), 5.4.10 Forget this AP
View all TP-Link EAP225-Wall manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
5.4.9 Local LAN Port Settings (Only for EAP115-Wall and EAP225-Wall) You can configure the LAN port of the EAP. VLAN PoE Out Enable this feature and specify the VLAN that the EAP is added to, and then the hosts connected to this EAP can only communicate with the devices in this VLAN. The valid values are from 1 to 4094, and the default is 1. If your EAP has PoE OUT port, you can enable this option to supply power to the connected device on this port. The EAP that has no PoE OUT port does not support this feature. 5.4.10 Forget this AP If you no longer want to manage this EAP, you may remove it. All the configurations and history about this EAP will be deleted. It is recommended to back up the configurations of this EAP before you forget it. 124