TP-Link EAP225-Wall Omada Controller Software 3.1.13 User Guide - Page 54
Con Mesh, Wireless Settings > Band Steering, Apply
View all TP-Link EAP225-Wall manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
dual-band clients to the 5GHz frequency band which supports higher transmission rates and more client devices, and thus to greatly improve the network quality. To configure Band Steering, follow the steps below. 1. Go to Wireless Settings > Band Steering. 2. Check the box to enable the Band Steering function. 3. Configure the following parameters to balance the clients on both frequency bands: Connection Threshold/ Difference Threshold Connection Threshold defines the maximum number of clients connected to the 5GHz band. The value of Connection Threshold is from 2 to 40, and the default is 20. Difference Threshold defines the maximum difference between the number of clients on the 5GHz band and 2.4GHz band. The value of Difference Threshold is from 1 to 8, and the default is 4. When the following two conditions are both met, the EAP prefers to refuse the connection request on 5GHz band and no longer steers other clients to the 5GHz band: 1. The number of clients on the 5GHz band reaches the Connection Threshold value. 2. The difference between the number of clients on the 2.4GHz band and 5GHz band reaches the Difference Threshold value. Max Failures If a client repeatedly attempts to associate with the EAP on the 5GHz band and the number of rejections reaches the value of Max Failures, the EAP will accept the request. The value is from 0 to 100, and the default is 10. 4. Click Apply. 3.1.4 Configure Mesh Mesh is used to establish a wireless network or expand a wired network through wireless connection on 5GHz radio band. In practical application, it can help users to conveniently deploy APs without requiring Ethernet cable. After mesh network establishes, the EAPs can be configured 48