TP-Link EAP225-Wall Omada Controller Software 3.1.13 User Guide - Page 125
IP Setting, Get a Dynamic IP Address From the DHCP Server
![]() |
View all TP-Link EAP225-Wall manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
5.4.2 IP Setting You can configure an IP address for this EAP. Two options are provided: DHCP and Static. Get a Dynamic IP Address From the DHCP Server 1. Configure your DHCP server. 2. Select DHCP on the page above. 3. Enable the Fallback IP feature. When the device cannot get a dynamic IP address, the fallback IP address will be used. 4. Set IP address, IP mask and gateway for the fallback address and click Apply. Manually Set a Static IP Address for the EAP 1. Select Static. 2. Set the IP address, IP mask and gateway for the static address and click Apply. 119
![](/manual_guide/products/tplink-omada-software-controller-omada-controller-software-3113-user-guide-0140742/125.png)
119
5.4.2
IP Setting
You can configure an IP address for this EAP. Two options are provided: DHCP and Static.
Get a Dynamic IP Address From the DHCP Server
1.
Configure your DHCP server.
2. Select
DHCP
on the page above.
3.
Enable the Fallback IP feature. When the device cannot get a dynamic IP address, the fallback IP
address will be used.
4.
Set IP address, IP mask and gateway for the fallback address and click
Apply
.
Manually Set a Static IP Address for the EAP
1. Select
Static
.
2.
Set the IP address, IP mask and gateway for the static address and click
Apply
.