TP-Link EAP225-Wall Omada Controller Software 3.1.13 User Guide - Page 92
Local Web Portal, Login is con d, con the login for the Portal in the,
View all TP-Link EAP225-Wall manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
NAS ID Configure a Network Access Server Identifier (NAS ID) using 1 to 64 characters on the portal. The NAS ID is sent to the RADIUS server by the controller through an authentication request packet. With the NAS ID which classifies users to different groups, the RADIUS server can send a customized authentication response. The default value is TP-Link. RADIUS Accounting Enable or disable RADIUS Accounting feature. Accounting Server IP Enter the IP address of the accounting server. Accounting Server Port Enter the port number of the accounting server. The default port number is 1813. Accounting Server Password Enter the shared secret key of the accounting server. Interim Update With this option enabled, you can specify the duration between accounting information updates. By default, the function is disabled. Enter the appropriate duration between updates for EAPs in Interim Update Interval. Interim Update Interval With Interim Update enabled, specify the appropriate duration between updates for EAPs. The default duration is 600 seconds. Portal Customization Select Local Web Portal or External Web Portal. Local Web Portal: If this option is selected, refer to step 3 to configure the login page and step 4 to configure the advertisement. External Web Portal: If this option is selected, follow the steps below. 1. Configure the external RADIUS server. 2. Enter the authentication login page's URL provided by the external portal server in the External Web Portal URL field. Note that you should update the External Web Portal after you upgrade your controller with old version to version 3.1.4 or above. Otherwise, the External Web Portal will not take effect. HTTPS Redirect With this function enabled, the unauthorized clients will be redirected to the Portal page when they are trying to browse HTTPS websites. With this function disabled, the unauthorized clients cannot browse HTTPS websites and are not redirected to the Portal page. Redirect If you enable this function, the portal will redirect the newly authenticated clients to the configured URL. It is disabled by default. Redirect URL If the Redirect function above is enabled, enter the URL that a newly authenticated client will be redirected to. 3. Local Web Portal is configured, configure the login page for the Portal in the Login Page section. 86