TP-Link T1600G-52TSTL-SG2452 T1600G-52TS V1 CLI Reference Guide - Page 103

User Guidelines Command in the Interface Range gigabitEthernet Mode is executed independently on all ports in the range. It does not affect the execution on the other ports at all if the command results in an error on one port. Example To enter the Interface range gigabitEthernet Configuration Mode, and configure ports 1, 2, 3, 6, 7 and 9 at the same time by adding them to one port-list: T1600G-52TS(config)# interface range gigabitEthernet 1/0/1-3,1/0/6-7,1/0/9 13.3 description Description The description command is used to add a description to the Ethernet port. To clear the description of the corresponding port, please use no description command. Syntax description string no description Parameter string -- Content of a port description, ranging from 1 to 16 characters. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Example Add a description Port _5 to port 1/0/5: T1600G-52TS(config)# interface gigabitEthernet 1/0/5 T1600G-52TS(config-if)# description Port_5 13.4 shutdown Description The shutdown command is used to disable an Ethernet port. To enable this port again, please use no shutdown command. 91