TP-Link T1600G-52TSTL-SG2452 T1600G-52TS V1 CLI Reference Guide - Page 51
user access-control mac-based, 5 user access-control port-based
View all TP-Link T1600G-52TSTL-SG2452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
6.4 user access-control mac-based Description The user access-control mac-based command is used to limit the MAC address of the users for login. Only the user with this MAC address you set here is allowed to login. To cancel the user access limit, please use no user access-control command. Syntax user access-control mac-based mac-addr no user access-control Parameter mac-addr -- The source MAC address. Only the user with this MAC address is allowed to login. Command Mode Global Configuration Mode Example Configure that only the user whose MAC address is 00:00:13:0A:00:01 is allowed to login: T1600G-52TS(config)# user access-control mac-based 00:00:13:0A:00:01 6.5 user access-control port-based Description The user access-control port-based command is used to limit the ports for login. Only the users connected to these ports you set here are allowed to login. To cancel the user access limit, please use no user access-control command. Syntax user access-control port-based interface { gigabitEthernet port | range gigabitEthernet port-list } no user access-control Parameter port -- The Ethernet port number. 39