TP-Link T1600G-52TSTL-SG2452 T1600G-52TS V1 CLI Reference Guide - Page 217
switchport, 4 shutdown
View all TP-Link T1600G-52TSTL-SG2452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
Example Create the loopback interface 1: T1600G-52TS(config)# interface loopback 1 25.3 switchport Description This switchport command is used to switch the Layer 3 interface into the Layer 2 port. To switch the Layer 2 port into the Layer 3 routed port, please use the no switchport command. Syntax switchport no switchport Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Example Switch the gigabitEthernet port 1/0/9 into the routed port: T1600G-52TS(config)# interface gigabitEthernet 1/0/9 T1600G-52TS(config-if)# no switchport 25.4 shutdown Description This shutdown command is used to shut down the specified interface. The interface type include: routed port, port-channel interface, loopback interface and VLAN interface. To enable the specified interface, please use the no shutdown command. Syntax shutdown no shutdown Command Mode Interface Configuration Mode 205