TP-Link T1600G-52TSTL-SG2452 T1600G-52TS V1 CLI Reference Guide - Page 164
ip igmp snooping multi-vlan-config
View all TP-Link T1600G-52TSTL-SG2452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Add static multicast IP address 225.0.0.1, which corresponds to VLAN 2, and configure the forward ports as ports 1/0/1-3: T1600G-52TS(config)# ip igmp snooping vlan-config 2 static 225.0.0.1 interface gigabitEthernet 1/0/1-3 21.11 ip igmp snooping multi-vlan-config Description The ip igmp snooping multi-vlan-config command is used to create Multicast VLAN. To delete the corresponding Multicast VLAN, please use no ip igmp snooping multi-vlan-config command. To restore the default values, please use no ip igmp snooping multi-vlan-config with specified parameters. Syntax ip igmp snooping multi-vlan-config [ vlan-id ] [ rtime router-time | mtime member-time | rport interface { gigabitEthernet port-list | port-channel lagid } ] no ip igmp snooping multi-vlan-config [ rtime router-time | mtime member-time | rport interface { gigabitEthernet port-list | port-channel lagid } ] Parameter vlan-id -- The ID of the multicast VLAN desired to create or modify, ranging from 2 to 4094. If not specified, the default multicast VLAN will be selected. router-time -- Router Port Time. Within this time, if the switch does not receive IGMP query message from the router port, it will consider this port is not a router port any more. Router Port Time ranges from 60 to 600 in seconds. By default, it is 0 and the global router-time will be used. member-time -- Member Port Time. Within this time, if the switch does not receive IGMP report message from the member port, it will consider this port is not a member port any more. Member Port Time ranges from 60 to 600 in seconds. By default, it is 0 and the global member-time will be used. port-list -- The list of Ethernet ports. lagid -- The ID of the LAGs. Command Mode Global Configuration Mode 152