TP-Link T1600G-52TSTL-SG2452 T1600G-52TS V1 CLI Reference Guide - Page 184
ipv6 mld profile
View all TP-Link T1600G-52TSTL-SG2452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Syntax ipv6 mld snooping max-groups [ maxgroup ] ipv6 mld snooping max-groups action { drop | replace } no ipv6 mld snooping max-groups no ipv6 mld snooping max-groups action Parameter maxgroup -- Specify the maximum numbers of groups that the port can join. It ranges from 0 to 1000 and the default value is 1000. drop -- When the number of the dynamic multicast groups that a port joins has exceeded the max-group, the port will not join any new multicast group. replace -- When the number of the dynamic multicast groups that a port joins has exceeded the max-group, the newly joined multicast group will replace an existing multicast group with the lowest multicast group address. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Example Specify the maximum numbers of groups that ports 1/0/2-5 can join as 10, and configure the throttling action as replace: T1600G-52TS(config)#interface range gigabitEthernet 1/0/2-5 T1600G-52TS(config-if-range)#ipv6 mld snooping max-groups 10 T1600G-52TS(config-if-range)#ipv6 mld snooping max-groups action replace 22.15 ipv6 mld profile Description The ipv6 mld profile command is used to create the configuration profile. To delete the corresponding profile, please use no ipv6 mld profile command. Syntax ipv6 mld profile id no ipv6 mld profile id Parameter id -- Specify the id of the configuration profile, ranging from 1 to 999. 172