TP-Link T1600G-52TSTL-SG2452 T1600G-52TS V1 CLI Reference Guide - Page 83
contact-info, 9 ip address
View all TP-Link T1600G-52TSTL-SG2452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Command Mode Global Configuration Mode Example Configure the system location as SHENZHEN: T1600G-52TS(config)# location SHENSHEN 11.8 contact-info Description The contact-info command is used to configure the system contact information. To clear the system contact information, please use no contact-info command. Syntax contact-info [ contact_info ] no contact-info Parameter contact_info -- Contact Information. It consists of 32 characters at most. It is "www.tp-link.com" by default. Command Mode Global Configuration Mode Example Configure the system contact information as www.tp-link.com: T1600G-52TS(config)# contact-info www.tp-link.com 11.9 ip address Description This ip address command is used to configure the IP address and IP subnet mask for the specified interface manually. The interface type includes: routed port, port-channel interface, loopback interface and VLAN interface. Syntax ip address { ip-addr } { mask } [ secondary ] no ip address [ ip-addr ] [ mask ] 71