TP-Link T1600G-52TSTL-SG2452 T1600G-52TS V1 CLI Reference Guide - Page 133
rule
View all TP-Link T1600G-52TSTL-SG2452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
T1600G-52TS(config)# access-list extended 220 rule 10 permit sip 192.168.0.100 smask 255.255.255.0 18.5 rule Description The rule command is used to configure MAC ACL rule. To delete the corresponding rule, please use no rule command. Syntax rule rule-id { deny | permit } [[ smac source-mac ] smask source-mac-mask ] [[ dmac destination-mac ] dmask destination-mac-mask ] no rule rule-id Parameter rule-id -- The rule ID. deny -- The operation to discard packets. permit --The operation to forward packets. It is the default value. source-mac -- The source MAC address contained in the rule. source-mac-mask -- The source MAC address mask. It is required if you typed the source MAC address. destination-mac -- The destination MAC address contained in the rule. destination-mac-mask -- The destination MAC address mask. It is required if you typed the destination MAC address. Command Mode Mac Access-list Configuration Mode Example Create a MAC ACL whose ID is 20, and add Rule 10 for it. In the rule, the source MAC address is 00:01:3F:48:16:23, the source MAC address mask is 11:11:11:11:11:00, and the packets match this rule will be forwarded by the switch: T1600G-52TS(config)# mac access-list 20 T1600G-52TS(config-mac-acl)# rule 10 permit smac 00:01:3F:48:16:23 smask 11:11:11:11:11:00 121