TP-Link T1600G-52TSTL-SG2452 T1600G-52TS V1 CLI Reference Guide - Page 177
ipv6 mld snooping report-suppression, 6 ipv6 mld snooping immediate-leave
View all TP-Link T1600G-52TSTL-SG2452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Command Mode Global Configuration Mode Example Specify MLD Snooping member port aging time as 100 seconds globally: T1600G-52TS(config)# ipv6 mld snooping mtime 100 22.5 ipv6 mld snooping report-suppression Description The ipv6 mld snooping report-suppression command is used enable the MLD report suppression function. When it is enabled, the switch forwards only the first MLD report message per mulicast group to the Layer 3 device, and the subsequent MLD reports from the same multicast group are discarded. To disable the MLD report suppression function and forward all the MLD reports to the Layer 3 device, please use no ip igmp snooping report-suppression command. This function is disabled by default. Syntax ipv6 mld snooping report-suppression no ipv6 mld snooping report-suppression Command Mode Global Configuration Mode Example Enable MLD Report message suppression function: T1600G-52TS(config)# ipv6 mld snooping report-suppression 22.6 ipv6 mld snooping immediate-leave Description The ipv6 mld snooping immediate-leave command is used to configure the Fast Leave function for port. To disable the Fast Leave function, please use no ipv6 mld snooping immediate-leave command. Syntax ipv6 mld snooping immediate-leave no ipv6 mld snooping immediate-leave 165