TP-Link T1600G-52TSTL-SG2452 T1600G-52TS V1 CLI Reference Guide - Page 98
ipv6 address link-local
View all TP-Link T1600G-52TSTL-SG2452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
address, the manually configured ipv6 link-local address will be deleted when the autoconfigured ipv6 link-local address takes effect. Syntax ipv6 address autoconfig Configuration Mode Interface Configuration Mode Example Enable the automatic configuration of the ipv6 link-local address on VLAN interface 1: T1600G-52TS(config)# interface vlan 1 T1600G-52TS(config-if)# ipv6 address autoconfig 12.3 ipv6 address link-local Description The ipv6 address link-local command is used to configure the ipv6 link-local address manually on a specified interface. To delete the configured link-local address, please use no ipv6 address link-local command. Syntax ipv6 address ipv6-addr link-local no ipv6 address ipv6-addr link-local Parameter ipv6-addr -- The link-local address of the interface. It should be a standardized IPv6 address with the prefix fe80::/10, otherwise this command will be invalid. Configuration Mode Interface Configuration Mode Example Configure the link-local address as fe80::1234 on the VLAN interface 1: T1600G-52TS(config)# interface vlan 1 T1600G-52TS(config-if)# ipv6 address fe80::1234 link-local 86