TP-Link T1600G-52TSTL-SG2452 T1600G-52TS V1 CLI Reference Guide - Page 104
flow-control, 6 duplex
View all TP-Link T1600G-52TSTL-SG2452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Syntax shutdown no shutdown Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Example Disable port 1/0/3: T1600G-52TS(config)# interface gigabitEthernet 1/0/3 T1600G-52TS(config-if)# shutdown 13.5 flow-control Description The flow-control command is used to enable the flow-control function for a port. To disable the flow-control function for this corresponding port, please use no flow-control command. With the flow-control function enabled, the Ingress Rate and Egress Rate can be synchronized to avoid packet loss in the network. Syntax flow-control no flow-control Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Example Enable the flow-control function for port 1/0/3: T1600G-52TS(config)# interface gigabitEthernet 1/0/3 T1600G-52TS(config-if)# flow-control 13.6 duplex Description The duplex command is used to configure the Duplex Mode for an Ethernet port. To return to the default configuration, please use no duplex command. 92