TP-Link T1600G-52TSTL-SG2452 T1600G-52TS V1 CLI Reference Guide - Page 23
interface, gigabitEthernet, port-channel, range, T1600G-52TS config-if, T1600G-52TSconfig-if-range,
View all TP-Link T1600G-52TSTL-SG2452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Mode Accessing Path Prompt Logout or Access the next mode Interface Configuration Mode Interface Configuration Mode VLAN Configuration Mode Layer 2 Interface: Use the interface gigabitEthernet port, interface port-channel lagid or interface range gigabitEthernet port-list command to enter this mode from Global Configuration mode. Layer 3 Interface: Use the no switchport command to enter Routed Port mode from Interface Configuration mode. Use the interface vlan vlan-id command to enter VLAN Interface mode from Global Configuration mode. Use the interface loopback id command to enter Loopback Interface mode from Global Configuration mode. Use the vlan vlan-list command to enter this mode from Global Configuration mode. T1600G-52TS (config-if)# or T1600G-52TS(config-if-range)# T1600G-52TS (config-if)# or T1600G-52TS(config-if-range)# T1600G-52TS (config-vlan)# Use the end command or press Ctrl+Z to return to Privileged EXEC mode. Enter the exit or the # command to return to Global Configuration mode. A port number must be specified in the interface command. Use the switchport command to switch to the Layer 2 interface mode. Use the end command or press Ctrl+Z to return to Privileged EXEC mode. Enter the exit or the # command to return to Global Configuration mode. Use the end command or press Ctrl+Z to return to Privileged EXEC mode. Enter the exit command or the # command to return to Global configuration mode. Note: 1. The user is automatically in User EXEC Mode after the connection between the PC and the switch is established by a Telnet/SSH connection. 2. Each command mode has its own set of specific commands. To configure some commands, you should access the corresponding command mode firstly. 11