TP-Link T1600G-52TSTL-SG2452 T1600G-52TS V1 CLI Reference Guide - Page 160
ip igmp snooping report-suppression, 6 ip igmp snooping immediate-leave
View all TP-Link T1600G-52TSTL-SG2452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Command Mode Global Configuration Mode Example Specify IGMP Snooping member port aging time as 100 seconds globally: T1600G-52TS(config)# ip igmp snooping mtime 100 21.5 ip igmp snooping report-suppression Description The ip igmp snooping report-suppression command is used enable the IGMP report suppression function. When it is enabled, the switch forwards only the first IGMP report message per mulicast group to the Layer 3 device, and the subsequent IGMP reports from the same multicast group are discarded. To disable the IGMP report suppression function and forward all the IGMP reports to the Layer 3 device, please use no ip igmp snooping report-suppression command. This function is disabled by default. Syntax ip igmp snooping report-suppression no ip igmp snooping report-suppression Command Mode Global Configuration Mode Example Enable the IGMP report suppression function: T1600G-52TS(config)# ip igmp snooping report-suppression 21.6 ip igmp snooping immediate-leave Description The ip igmp snooping immediate-leave command is used to configure the Fast Leave function for port. To disable the Fast Leave function, please use no ip igmp snooping immediate-leave command. Syntax ip igmp snooping immediate-leave no ip igmp snooping immediate-leave 148