TP-Link T1600G-52TSTL-SG2452 T1600G-52TS V1 CLI Reference Guide - Page 85
reset, reboot
View all TP-Link T1600G-52TSTL-SG2452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Example Enable the DHCP Client function on the Lay 3 routed port 1/0/1: T1600G-52TS(config)# interface gigabitEthernet 1/0/1 T1600G-52TS(config-if)# no switchport T1600G-52TS(config-if)# ip address-alloc dhcp Disable the IP address obtaining function on the VLAN interface 2: T1600G-52TS(config)# interface vlan 2 T1600G-52TS(config-if)# no ip address 11.11 reset Description The reset command is used to reset the switch's software. After resetting, all configuration of the switch will restore to the factory defaults and your current settings will be lost. Syntax reset Command Mode Privileged EXEC Mode Example Reset the software of the switch: T1600G-52TS# reset 11.12 reboot Description The reboot command is used to reboot the Switch. To avoid damage, please don't turn off the device while rebooting. Syntax reboot Command Mode Privileged EXEC Mode 73