TP-Link T2600G-52TS TL-SG3452 T2600G-28TS V1 CLI Reference Guide - Page 132
radius server-account
View all TP-Link T2600G-52TS TL-SG3452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
which you can copy from another switch's configuration file. The password or encrypted-password you configured here will be displayed in the encrypted form. acct-key { [ 0 ] password | 7 encrypted-password } -- 0 and 7 are the encryption type. 0 indicates that an unencrypted password will follow. 7 indicates that a symmetric encrypted password with a fixed length will follow. By default, the encryption type is 0. "password" is the shared password for the switch and the authentication servers to exchange messages which contains 31 characters at most. The question marks and spaces are not allowed. "encrypted-password" is a symmetric encrypted password with a fixed length, which you can copy from another switch's configuration file. The password or encrypted-password you configured here will be displayed in the encrypted form. Command Mode Global Configuration Mode Example Configure the IP address of the accounting server as 10.20.1.100 and password as tplink: T2600G-28TS(config)#radius auth-pri 10.20.1.100 auth-key tplink 18.13 radius server-account Description The radius server-account command is used to enable the accounting feature. To disable the accounting feature, please use no radius server-account command. Syntax radius server-account no radius server-account Command Mode Global Configuration Mode Example Enable the accounting feature: T2600G-28TS(config)#radius server-account 116