TP-Link T2600G-52TS TL-SG3452 T2600G-28TS V1 CLI Reference Guide - Page 253
ip igmp profile
View all TP-Link T2600G-52TS TL-SG3452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
drop -- When the number of the dynamic multicast groups that a port joins has exceeded the max-group, the port will not join any new multicast group. replace -- When the number of the dynamic multicast groups that a port joins has exceeded the max-group, the newly joined multicast group will replace an existing multicast group with the lowest multicast group address. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Example Specify the maximum numbers of groups that ports 1/0/2-5 can join as 10, and configure the throttling action as replace: T2600G-28TS(config)#interface range gigabitEthernet 1/0/2-5 T2600G-28TS(config-if-range)#ip igmp snooping max-groups 10 T2600G-28TS(config-if-range)#ip igmp snooping max-groups action replace 31.15 ip igmp profile Description The ip igmp profile command is used to create the configuration profile. To delete the corresponding profile, please use no ip igmp profile command. Syntax ip igmp profile id no ip igmp profile id Parameter id -- Specify the id of the configuration profile, ranging from 1 to 999. Command Mode Global Configuration Mode Example Create the profile 1: T2600G-28TS(config)# ip igmp profile 1 237