TP-Link T2600G-52TS TL-SG3452 T2600G-28TS V1 CLI Reference Guide - Page 139

Example Enable log host 2 and set its IP address as 192.168.0.148, the level 5: T2600G-28TS(config)# logging host index 2 192.168.0.148 5 19.7 logging console Description The logging console command is used to send the system logs to the console port. To disable logging to the console, please use no logging console command. This function is enabled by default. Syntax logging console no logging console Command Mode Global Configuration Mode Example Enable logging to the console port: T2600G-28TS(config)# logging console 19.8 logging console level Description The logging console level command is used to limit messages logged to the console port. System logs no higher than the set threshold level will be displayed on the console port. To restore the threshold level to default value, please use no logging console level command. Syntax logging console level level no logging monitor level Parameter level -- Severity level of the log information output to the console port. There are 8 severity levels marked with values 0-5. The smaller value has the higher priority. Only the log with the same or smaller severity level value will be output 123