TP-Link T2600G-52TS TL-SG3452 T2600G-28TS V1 CLI Reference Guide - Page 263
ipv6 mld snooping report-suppression, ipv6 mld snooping immediate-leave
View all TP-Link T2600G-52TS TL-SG3452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 263 highlights
32.5 ipv6 mld snooping report-suppression Description The ipv6 mld snooping report-suppression command is used enable the MLD report suppression function. When it is enabled, the switch forwards only the first MLD report message per mulicast group to the Layer 3 device, and the subsequent MLD reports from the same multicast group are discarded. To disable the MLD report suppression function and forward all the MLD reports to the Layer 3 device, please use no ip igmp snooping report-suppression command. This function is disabled by default. Syntax ipv6 mld snooping report-suppression no ipv6 mld snooping report-suppression Command Mode Global Configuration Mode Example Enable MLD Report message suppression function: T2600G-28TS(config)# ipv6 mld snooping report-suppression 32.6 ipv6 mld snooping immediate-leave Description The ipv6 mld snooping immediate-leave command is used to configure the Fast Leave function for port. To disable the Fast Leave function, please use no ipv6 mld snooping immediate-leave command. Syntax ipv6 mld snooping immediate-leave no ipv6 mld snooping immediate-leave Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Example Enable the Fast Leave function for port 1/0/3: T2600G-28TS(config)# interface gigabitEthernet 1/0/3 T2600G-28TS(config-if)# ipv6 mld snooping immediate-leave 247