TP-Link T2600G-52TS TL-SG3452 T2600G-28TS V1 CLI Reference Guide - Page 17

Preface This Guide is intended for network administrator to provide referenced information about CLI (Command Line Interface). The device mentioned in this Guide stands for T2600G-28TS/T2600G-52TS JetStream Gigabit L2 Managed Switch without any explanation. The commands in this guilde apply to these models if not specially noted, and T2600G-28TS is taken as an example model in the example commands. Overview of this Guide Chapter 1: Using the CLI Provide information about how to use the CLI, CLI Command Modes, Security Levels and some Conventions. Chapter 2: User Interface Provide information about the commands used to switch between five CLI Command Modes. Chapter 3: IEEE 802.1Q VLAN Commands Provide information about the commands used for configuring IEEE 802.1Q VLAN. Chapter 4: MAC-based VLAN Commands Provide information about the commands used for configuring MAC-based VLAN. Chapter 5: Protocol VLAN Commands Provide information about the commands used for configuring Protocol VLAN. Chapter 6: VLAN-VPN Commands Provide information about the commands used for configuring VLAN-VPN (Virtual Private Network) function. Chapter 7: Private VLAN Commands Provide information about the commands used for configuring Private VLAN. Chapter 8: GVRP Commands Provide information about the commands used for configuring GVRP (GARP VLAN registration protocol). Chapter 9: Voice VLAN Commands Provide information about the commands used for configuring Voice VLAN. Chapter 10: Etherchannel Commands Provide information about the commands used for configuring LAG (Link Aggregation Group) and LACP (Link Aggregation Control Protocol). Chapter 11: User Management Commands Provide information about the commands used for user management. 1