TP-Link T2600G-52TS TL-SG3452 T2600G-28TS V1 CLI Reference Guide - Page 264
ipv6 mld snooping drop-unknown, ipv6 mld snooping last-listener query-inteval, ipv6 mld snooping
View all TP-Link T2600G-52TS TL-SG3452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 264 highlights
32.7 ipv6 mld snooping drop-unknown Description The ipv6 mld snooping drop-unknown command is used to enable the unknown multicast packets filter function. To disable this function, please use no ipv6 mld snooping drop-unknown command. By default, it is disabled. Syntax ipv6 mld snooping drop-unknown no ipv6 mld snooping drop-unknown Command Mode Global Configuration Mode Example Enable unknown multicast filter function: T2600G-28TS(config)# ipv6 mld snooping drop-unknown 32.8 ipv6 mld snooping last-listener query-inteval Description The ipv6 mld snooping last-listener query-inteval command is used to specify the interval to send Specific Query Message. The default value is 1 second. To restore the default interval, please use no ipv6 mld snooping last-listener query-inteval command. Syntax ipv6 mld snooping last-listener query-inteval interval no ipv6 mld snooping last-listener query-inteval Parameter interval -- Specify the interval to send Specific Query Message in seconds, ranging from 1 to 5. Command Mode Global Configuration Mode Example Specify the interval of Specific Query Message to 3 seconds: T2600G-28TS(config)# ipv6 mld snooping last-listener query-inteval 3 32.9 ipv6 mld snooping last-listener query-count Description The ipv6 mld snooping last-listener query-count command is used to specify the numbers of Specific Query Message to be sent. The default value is 2. To 248