TP-Link T2600G-52TS TL-SG3452 T2600G-28TS V1 CLI Reference Guide - Page 137
logging file flash frequency, logging file flash level
View all TP-Link T2600G-52TS TL-SG3452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
19.4 logging file flash frequency Description The logging file flash frequency command is used to specify the frequency to synchronize the system log file in the log buffer to the flash. To resume the default synchronizing frequency, please use the no logging file flash frequency command. Syntax logging file flash frequency { periodic periodic | immediate } no logging file flash frequency Parameter periodic -- The frequency to synchronize the system log file in the log buffer to the flash, ranging from 1 to 48 hours. By default, the synchronization process takes place every 24 hours. immediate -- The system log file in the buffer will be synchronized to the flash immediately. This option will reduce the life of the flash and is not recommended. Command Mode Global Configuration Mode Example Specify the log file synchronization frequency as 10 hours: T2600G-28TS(config)#logging file flash frequency periodic10 19.5 logging file flash level Description The logging file flash level command is used to specify the system log message severity level. Messages will a severity level equal to or higher than this value will be stored to the flash. To restore to the default level, please use no logging file flash level command. Syntax logging file flash level level no logging file flash level 121