TP-Link T2600G-52TS TL-SG3452 T2600G-28TS V1 CLI Reference Guide - Page 96
ip http secure-ciphersuite, ip http secure-max-users
View all TP-Link T2600G-52TS TL-SG3452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Example Configure the protocol of SSL connection as SSL 3.0: T2600G-28TS(config)# ip http secure-protocol ssl3 12.6 ip http secure-ciphersuite Description The ip http secure-ciphersuite command is used to configure the cipherSuites over the SSL connection supported by the switch. To restore to the default ciphersuite types, please use no ip http secure-ciphersuite command. Syntax ip http secure-ciphersuite { [ 3des-ede-cbc-sha ] [ rc4-128-md5 ] [ rc4-128-sha ] [ des-cbc-sha ] } no ip http secure-ciphersuite Parameter [ 3des-ede-cbc-sha ] [ rc4-128-md5 ] [ rc4-128-sha ] [ des-cbc-sha ] -- Specify the encryption algorithm and the digest algorithm to use on an SSL connection. By default, the switch supports all these ciphersuites. Command Mode Global Configuration Mode Example Configure the ciphersuite to be used for encryption over the SSL connection as 3des-ede-cbc-sha: T2600G-28TS(config)# ip http secure-ciphersuite 3des-ede-cbc-sha 12.7 ip http secure-max-users Description The ip http secure-max-users command is used to configure the maximum number of users that are allowed to connect to the HTTPs server. To cancel this limitation, please use no ip http secure-max-users command. Syntax ip http secure-max-users admin-num guest-num no ip secure-max-users 80