TP-Link T2600G-52TS TL-SG3452 T2600G-28TS V1 CLI Reference Guide - Page 85
user access-control ip-based
View all TP-Link T2600G-52TS TL-SG3452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Command Mode Global Configuration Mode User Guidelines If both the user name (password) and user name (secret) are defined, only the latest configured password will take effect. Example Add and enable a new admin user named "tplink", of which the password is "admin". The password will be displayed in the encrypted form. T2600G-28TS(config)#user name tplink privilege admin secret 0 admin 11.3 user access-control ip-based Description The user access-control ip-based command is used to limit the IP-range of the users for login. Only the users within the IP-range you set here are allowed to login. To cancel the user access limit, please use no user access-control command. Syntax user access-control ip-based { ip-addr ip-mask } [ snmp ] [ telnet ] [ ssh ] [ http ] [ https ] [ ping ] [ all ] no user access-control Parameter ip-addr -- The source IP address. Only the users within the IP-range you set here are allowed for login. ip-mask --The subnet mask of the IP address. [ snmp ] [ telnet ] [ ssh ] [ http ] [ https ] [ ping ] [ all ] -- Specify the access interface. These interfaces are enabled by default. Command Mode Global Configuration Mode Example Enable the access-control of the user whose IP address is 192.168.0.148: T2600G-28TS(config)# user access-control ip-based 192.168.0.148 255.255.255.255 69