TP-Link T2600G-52TS TL-SG3452 T2600G-28TS V1 CLI Reference Guide - Page 239
spanning-tree guard root, spanning-tree guard tc
View all TP-Link T2600G-52TS TL-SG3452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 239 highlights
Example Enable the Loop Protect function for port 2: T2600G-28TS(config)# interface gigabitEthernet 1/0/2 T2600G-28TS(config-if)# spanning-tree guard loop 30.20 spanning-tree guard root Description The spanning-tree guard root command is used to enable the Root Protect function for a port. With the Root Protect function enabled, the root bridge will set itself automatically as ERROR-PORT when receiving BPDU packets with higher priority, in order to maintain the role of root ridge. To disable the Root Protect function, please use no spanning-tree guard root command. Syntax spanning-tree guard root no spanning-tree guard root Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Example Enable the Root Protect function for port 2: T2600G-28TS(config)# interface gigabitEthernet 1/0/2 T2600G-28TS(config-if)# spanning-tree guard root 30.21 spanning-tree guard tc Description The spanning-tree guard tc command is used to enable the TC Protect of Spanning Tree function for a port. To disable the TC Protect of Spanning Tree function, please use no spanning-tree guard tc command. A switch removes MAC address entries upon receiving TC-BPDUs. If a malicious user continuously sends TC-BPDUs to a switch, the switch will be busy with removing MAC address entries, which may decrease the performance and stability of the network. With the Protect of Spanning Tree function enabled, you can configure the number of TC-BPDUs in a required time, so as to avoid the process of removing MAC addresses frequently. 223