TP-Link TL-R402M User Guide - Page 28

DHCP Clients List - dynamic dns

Get TP-Link TL-R402M PDF manuals and user guides
UPC - 696726402015
View all TP-Link TL-R402M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

TL-R402M Cable/DSL Router User Guide Figure 4-11 DHCP Settings ¾ DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must manually configure the computer ¾ Start IP Address - This field specifies the first of the addresses in the IP address pool. 192.168.1.100 is the default start address ¾ End IP Address - This field specifies the last of the addresses in the IP address pool. 192.168.1.199 is the default end address ¾ Address Lease Time - The Address Lease Time is the amount of time a network user will be allowed connection to the router with their current dynamic IP address. Enter the amount of time, in minutes, which the user will be "leased" this dynamic IP address. The range of the time is 1 ~ 2880 minutes. The default value is 120 minutes ¾ Default Gateway - (Optional.) Suggest to input the IP address of the LAN port of the router, default value is 192.168.1.1 ¾ Default Domain - (Optional.) Input the domain name of your network ¾ Primary DNS - (Optional.) Input the DNS IP address provided by your ISP. Or consult your ISP ¾ Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP provides two DNS servers ) Note: To use the DHCP server function of the router, you must configure all computers on the LAN as "Obtain an IP Address automatically" mode. This function will take effect until the router reboots. 4.5.2 DHCP Clients List This page shows Client Name, MAC Address, Assigned IP and Lease Time for each DHCP 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
TL-R402M
Cable/DSL Router User Guide
21
Figure 4-11 DHCP Settings
¾
DHCP Server - Enable
or
Disable
the DHCP server. If you disable the Server, you must
have another DHCP server within your network or else you must manually configure the
computer
¾
Start IP Address -
This field specifies the first of the addresses in the IP address pool.
192.168.1.100 is the default start address
¾
End IP Address -
This field specifies the last of the addresses in the IP address pool.
192.168.1.199 is the default end address
¾
Address Lease Time -
The
Address Lease Time
is the amount of time a network user will
be allowed connection to the router with their current dynamic IP address. Enter the amount
of time, in minutes, which the user will be "leased" this dynamic IP address. The range of the
time is 1 ~ 2880 minutes. The default value is 120 minutes
¾
Default Gateway -
(Optional.) Suggest to input the IP address of the LAN port of the router,
default value is 192.168.1.1
¾
Default Domain -
(Optional.) Input the domain name of your network
¾
Primary DNS -
(Optional.) Input the DNS IP address provided by your ISP. Or consult your
ISP
¾
Secondary DNS -
(Optional.) Input the IP address of another DNS server if your ISP
provides two DNS servers
)
Note:
To use the DHCP server function of the router, you must configure all computers on the LAN as
"Obtain an IP Address automatically" mode. This function will take effect until the router reboots.
4.5.2 DHCP Clients List
This page shows
Client Name, MAC Address, Assigned IP
and
Lease Time
for each DHCP