TP-Link TL-R402M User Guide - Page 47

Factory Defaults - download

Get TP-Link TL-R402M PDF manuals and user guides
UPC - 696726402015
View all TP-Link TL-R402M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

TL-R402M Cable/DSL Router User Guide you write down the router settings before you upgrade its firmware. To upgrade the router's firmware, follow these instructions: 1. Download a more recent firmware upgrade file from the TP-LINK website (www.tp-link.com). 2. Run a TFTP Server on a PC on your LAN, and take the file in the TFTP server's path. 3. Type the downloaded file name into the File Name box. 4. Type the IP address of the PC that runs the TFTP server in the TFTP Server's IP Address field. 5. Click the Upgrade button. ¾ Firmware Version - displays the current firmware version ¾ Hardware Version - displays the current hardware version. The hardware version of the upgrade file must accord with the current hardware version ) Note: ¾ Do not turn off the router or press the Reset button while the firmware is being upgraded ¾ The router will reboot after the upgrading has been finished 4.9.2 Factory Defaults This page (shown in Figure 4-32) allows you to restore the factory default settings for the router. Figure 4-32 Restore Factory Default Click the Restore button to reset all configuration settings to their default values. ¾ The default User Name: admin ¾ The default Password: admin ¾ The default IP Address: 192.168.1.1 ¾ The default Subnet Mask: 255.255.255.0 ) Note: 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
TL-R402M
Cable/DSL Router User Guide
40
you write down the router settings before you upgrade its firmware.
To upgrade the router's firmware, follow these instructions:
1.
Download a more recent firmware upgrade file from the TP-LINK website (
www.tp-link.com
).
2.
Run a TFTP Server on a PC on your LAN, and take the file in the TFTP server’s path.
3.
Type the downloaded file name into the
File Name
box.
4.
Type the IP address of the PC that runs the TFTP server in the
TFTP Server’s IP Address
field.
5.
Click the
Upgrade
button.
¾
Firmware Version
-
displays the current firmware version
¾
Hardware Version
-
displays the current hardware version. The hardware version of the
upgrade file must accord with the current hardware version
)
Note:
¾
Do not turn off the router or press the Reset button while the firmware is being upgraded
¾
The router will reboot after the upgrading has been finished
4.9.2 Factory Defaults
This page (shown in Figure 4-32) allows you to restore the factory default settings for the router.
Figure 4-32 Restore Factory Default
Click the
Restore
button to reset all configuration settings to their default values.
¾
The default
User Name
: admin
¾
The default
Password
: admin
¾
The default
IP Address
: 192.168.1.1
¾
The default
Subnet Mask
: 255.255.255.0
)
Note: