TP-Link TL-R600VPN TL-R600VPN V1 User Guide - Page 31

MAC Clone

Get TP-Link TL-R600VPN PDF manuals and user guides View all TP-Link TL-R600VPN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Server and DMZ Host may change accordingly at the same time; you'd better re-configure it as well. 4.3.3 MAC Clone Choose menu "Network→MAC Clone", you can configure the MAC address of the WAN on the screen below (shown in Figure 4-11). Some ISPs require that you register the MAC address of your adapter, which is connected to your cable, DSL modem or Ethernet during installation. You do not generally need to change anything here. Figure 4-11 ¾ WAN MAC Address - This field displays the current MAC address of the WAN port, which is used for the WAN port. If your ISP requires that you register the MAC address, please enter the correct MAC address into this field. The format for the MAC address is XX-XX-XX-XX-XX-XX (for example: 00-0A-EB- E6-B9-49). ¾ Your PC's MAC Address - This field displays the MAC address of the PC that is managing the router. If the MAC address is required, you can click the Clone MAC Address button and this MAC address will fill in the "WAN MAC Address" field. ) Note: 1) Click Restore Factory MAC to restore the MAC address of WAN port to the factory default value. 2) Only the PC(s) on your LAN can use the MAC Address Clone feature. 3) After you finish the configuration, click the Save button, and the router will prompt you to reboot. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
SafeStream
TM
Gigabit Broadband VPN Router User Guide
TL-R600VPN
25
Server and DMZ Host may change accordingly at the same time; you’d better
re-configure it as well.
4.3.3
MAC Clone
Choose menu “
Network
→
MAC Clone
”, you can configure the MAC address of the WAN on the
screen below (shown in Figure 4-11).
Some ISPs require that you register the MAC address of your adapter, which is connected to your
cable, DSL modem or Ethernet during installation. You do not generally need to change anything
here.
Figure 4-11
¾
WAN MAC Address -
This field displays the current MAC address of the WAN port, which is
used for the WAN port. If your ISP requires that you register the MAC address, please enter
the correct MAC address into this field. The format for the MAC address is
XX-XX-XX-XX-XX-XX (for example: 00-0A-EB- E6-B9-49).
¾
Your PC's MAC Address -
This field displays the MAC address of the PC that is managing
the router. If the MAC address is required, you can click the
Clone MAC Address
button
and this MAC address will fill in the “WAN MAC Address” field.
)
Note:
1)
Click
Restore Factory MAC
to restore the MAC address of WAN port to the factory
default value.
2)
Only the PC(s) on your LAN can use the
MAC Address Clone
feature.
3)
After you finish the configuration, click the
Save
button, and the router will prompt you to
reboot.