TP-Link TL-R600VPN TL-R600VPN V1 User Guide - Page 51
IPSec, Policy Name, Local Subnet, Remote Subnet, Exchange Mode, To add/modify an IPsec entry, Step 1
View all TP-Link TL-R600VPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-40 ¾ IPSec: Enable or disable IPsec and click save to apply. ¾ Policy Name: The unique name to the IPsec policy for identification and management purposes. ¾ Local Subnet: The IP address range on your local LAN to identify which PCs on your LAN are covered by this policy. It's formed by IP address and subnet mask. ¾ Remote Subnet: The IP address range on your remote network to identify which PCs on the remote network are covered by this policy. It's formed by IP address and subnet mask. ¾ Exchange Mode: The negotiation mode for the policy. To add/modify an IPsec entry: Step 1: Click Add New.../Modify shown in Figure 4-40, you will see a new screen shown in Figure 4-41. Step 2: Enter the Policy Name, Local Subnet, Remote Subnet, Remote Gateway, PFS Lifetime and then select the Exchange Mode, Security Protocol, Authentication Algorithm, Encryption Algorithm, IKE Security Policy, PFS Group. Then enable or disable the settings. 45