TP-Link TL-R600VPN TL-R600VPN V1 User Guide - Page 32

DHCP Settings

Get TP-Link TL-R600VPN PDF manuals and user guides View all TP-Link TL-R600VPN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide 4.4 DHCP Choose menu "DHCP", the next submenus are shown below. Figure 4-12 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.4.1 DHCP Settings Choose menu "DHCP→DHCP Settings", you can configure the DHCP in the next screen (shown in Figure 4-13). The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PCs that are connected to the router on the LAN. Figure 4-13 ¾ DHCP Server - Enable or disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must manually configure the computer. ¾ Start IP Address - This field specifies the first address in the IP address pool. The default address is 192.168.0.100. ¾ End IP Address - This field specifies the end address in the IP address pool. The default address is 192.168.0.199. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
SafeStream
TM
Gigabit Broadband VPN Router User Guide
TL-R600VPN
26
4.4
DHCP
Choose menu “
DHCP
”, the next submenus are shown below.
Figure 4-12
Click any of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.
4.4.1
DHCP Settings
Choose menu “
DHCP
→
DHCP Settings
”, you can configure the DHCP in the next screen (shown
in Figure 4-13).
The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which
provides the TCP/IP configuration for all the PCs that are connected to the router on the LAN.
Figure 4-13
¾
DHCP Server - Enable
or
disable
the DHCP server. If you disable the Server, you must
have another DHCP server within your network or else you must manually configure the
computer.
¾
Start IP Address -
This field specifies the first address in the IP address pool. The default
address is 192.168.0.100.
¾
End IP Address -
This field specifies the end address in the IP address pool. The default
address is 192.168.0.199.