TP-Link TL-SG5412F TL-SG5428 V1 CLI Reference Guide - Page 113
bridge address static
View all TP-Link TL-SG5412F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Enable Port Security function for port1, select Static mode as the learn mode, and specify the maximum number of MAC addresses that can be learned on this port as 30: TP-LINK(config)# interface ethernet 1 TP-LINK(config-if)# bridge address port-security max-number 30 mode static status enable bridge address static Description The bridge address static command is used to add the static MAC address entry. To remove the corresponding entry, please use no bridge address static command. The static address can be added or removed manually, independent of the aging time. In the stable networks, the static MAC address entries can facilitate the switch to reduce broadcast packets and enhance the efficiency of packets forwarding remarkably. Syntax bridge address static {mac mac} {vid vid} {port port} no bridge address static [mac] [vid] [port] Parameter mac --The MAC address of the entry you desire to add. vid -- The VLAN ID number of your desired entry. It ranges from 1 to 4094. port -- The Port number of your desired entry. It ranges from 1 to 12. Command Mode Global Configuration Mode Example Add a static Mac address entry to bind the MAC address 00:02:58:4f:6c:23, VLAN1 and Port1 together: TP-LINK(config)# bridge address static mac 00:02:58:4f:6c:23 vid 1 port 1 101