TP-Link TL-SG5412F TL-SG5428 V1 CLI Reference Guide - Page 210
LLDP Commands, lldp enable, lldp hold-multiplier
View all TP-Link TL-SG5412F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
Chapter 31 LLDP Commands LLDP function enables network devices to advertise their own device information periodically to neighbors on the same LAN. The information of the LLDP devices in the LAN can be stored by its neighbor in a standard MIB, so it is possible for the information to be accessed by a Network Management System (NMS) using SNMP. lldp enable Description The lldp enable command is used to enable LLDP function. To return to the default configuration, please use no lldp enable command. Syntax lldp enable no lldp enable Command Mode Global Configuration Mode Example Enable lldp function globally: TP-LINK(config)# lldp enable lldp hold-multiplier Description The lldp hold-multiplier command is used to configure the Hold Multiplier parameter. The aging time of the local information in the neighbor device is determined by the actual TTL value used in the sending LLDPDU. TTL = Hold Multiplier * Transmit Interval. To return to the default configuration, please use no lldp hold-multiplier command. Syntax lldp hold-multiplier multiplier no lldp hold-multiplier Parameter multiplier -- Configure the Hold Multiplier parameter. It ranges from 2 to 10. By default, it is 4. 198