TP-Link TL-SG5412F TL-SG5428 V1 CLI Reference Guide - Page 57
lacp admin-key, lacp port-priority
View all TP-Link TL-SG5412F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Enable LACP protocol on the port 1: TP-LINK(config)# interface ethernet 1 TP-LINK(config-if)# lacp lacp admin-key Description The lacp admin-key command is used to configure the admin key. To restore to the default value, please use no lacp admin-key command. Syntax lacp admin-key value no lacp admin-key Parameter value -- admin key, ranging from 0 to 65535. By default, the value is 1. Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Configure the admin key of port 1 as 1024: TP-LINK(config)# interface Ethernet 1 TP-LINK(config-if)# lacp admin-key 1024 lacp port-priority Description The lacp port-priority command is used to set the priority of the current port. To restore to the default priority, please use no lacp port-priority command. Syntax lacp port-priority value no lacp port-priority 45