TP-Link TL-SG5412F TL-SG5428 V1 CLI Reference Guide - Page 31
show vlan, show interface switchport, Description, Syntax, Parameter, Command Mode, Example
View all TP-Link TL-SG5412F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Specify the egress-rule of port 2 in vlan 3 as tagged: TP-LINK(config)# interface ethernet 2 TP-LINK(config-if)# switchport general egress-rule 3 tagged show vlan Description The show vlan command is used to display the information of IEEE 802.1Q VLAN . Syntax show vlan [vlan-id] Parameter vlan-id -- VLAN ID, ranging from 1 to 4094. By default , display all the information of IEEE 802.1Q VLAN. Command Mode Any Configuration Mode Example Display the information of vlan 5: TP-LINK(config)# show vlan 5 show interface switchport Description The show interface switchport command is used to display the IEEE 802.1Q VLAN configuration information of the specified port. Syntax show interface switchport [port-num] Parameter port-num -- The port number. By default, display the VLAN configuration information of all ports. Command Mode Any Configuration Mode Example Display the VLAN configuration information of all ports: TP-LINK(config)# show interface switchport 19