TP-Link TL-SG5412F TL-SG5428 V1 CLI Reference Guide - Page 120
ip management-vlan, ip dhcp-alloc, ip bootp-alloc
View all TP-Link TL-SG5412F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
ip management-vlan Description The ip management-vlan command is used to configure the IP management VLAN, through which you can log on to the switch. Syntax ip management-vlan {vlan-id} Parameter vlan-id -- VLAN ID, ranging from 1 to 4094. Command Mode Global Configuration Mode Example Set the VLAN6 as IP management VLAN: TP-LINK(config)# ip management-vlan 6 ip dhcp-alloc Description The ip dhcp-alloc command is used to enable the DHCP Client function. When this function is enabled, the switch will obtain IP from DHCP Client server. Syntax ip dhcp-alloc Command Mode Global Configuration Mode Example Enable the DHCP Client function: TP-LINK(config)# ip dhcp-alloc ip bootp-alloc Description The ip bootp-alloc command is used to obtain IP address from BOOTP Server. Syntax ip bootp-alloc 108