TP-Link TL-SG5412F TL-SG5428 V1 CLI Reference Guide - Page 184
snmp view-add, snmp group-add
View all TP-Link TL-SG5412F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
snmp view-add Description The snmp view-add command is used to add View. To delete the corresponding View, please use no snmp view-add command. The OID (Object Identifier) of the SNMP packets is used to describe the managed objects of the switch, and the MIB (Management Information Base) is the set of the OIDs. The SNMP View is created for the SNMP management station to manage MIB objects. Syntax snmp view-add {name} {mib-oid} {include | exclude} no snmp view-add {name} {mib-oid} Parameter name -- The entry name of View, ranging from 1 to 16 characters. Each View can include several entries with the same name. mib-oid -- MIB Object ID. It is the Object Identifier (OID) for the entry of View, ranging from 1 to 61 characters. include | exclude -- View Type, with include and exclude options. They represent the view entry can/cannot be managed by the SNMP management station individually. Command Mode Global Configuration Mode Example Add a View named view1, configuring the OID as 1.3.6.1.6.3.20, and this OID can be managed by the SNMP management station: TP-LINK(config)# snmp view-add view1 1.3.6.1.6.3.20 include snmp group-add Description The snmp group-add command is used to manage and configure the SNMP group. To delete the corresponding SNMP group, please use no snmp group-add command. SNMP v3 provides the VACM (View-based Access Control Model) and USM (User-Based Security Model) mechanisms for authentication. The users in the SNMP Group can manage the device via the Read View, Write View and Notify View. And the authentication mode and the 172