TP-Link TL-SG5412F TL-SG5428 V1 CLI Reference Guide - Page 156
acl policy action-add
View all TP-Link TL-SG5412F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Parameter name -- The Policy Name, ranging from 1 to 16 characters. Command Mode Global Configuration Mode Example Add a Policy named policy1: TP-LINK(config)# acl policy policy-add policy1 acl policy action-add Description The acl policy action-add command is used to add ACLs and create actions for the policy. To delete the corresponding actions, please use no acl policy action-add command. Syntax acl policy action-add {policy-name} {acl-id} [rate rate] [osd {none | discard}] [e-port egress-port] [mirr mirror] no acl policy action-add {policy-name} {acl-id} Parameter policy-name -- The Policy Name, ranging from 1 to 16 characters. acl-id -- The ACL for configuration in the policy. rate -- The rate of Stream Condition, ranging from 1 to 1000000 in kbps. osd -- Out of Band disposal of Stream Condition. It is the disposal way of the data packets those are transmitted beyond the rate. There are two options, none and discard. By default, the option is none. egress-port -- The Destination Port of Redirect. The data packets matching the corresponding ACL will be forwarded to the specific port. By default, it is All Ports. mirror -- The Mirror Port of Stream Mirror. By default, it is 1. Command Mode Global Configuration Mode Example Create a Policy named policy1. For the data packets matching ACL 120 in the policy, if the rate beyond 1000kbps, will be discarded by the switch: 144