TP-Link TL-SG5412F TL-SG5428 V1 CLI Reference Guide - Page 53
link-aggregation, Syntax, Command Mode, Parameter, Example, Description
View all TP-Link TL-SG5412F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Syntax interface range link-aggregation group-list no interface range link-aggregation group-list Command Mode Global Configuration Mode Parameter group-list --The aggregation group list. You can configure some aggregation groups at the same time. Example Access the Interface range Link-aggregation Mode and configure the aggregation group 1, 4-6: TP-LINK(config)# interface range link-aggregation 1,4-6 TP-LINK(config-if)# link-aggregation Description The link-aggregation command is used to add the current Ethernet port to an aggregation group. To remove the current Ethernet port from the aggregation group, please use no link-aggregation command. Syntax link-aggregation group-num no link-aggregation Parameter group-num --The LAG number, ranging from1 to 14. Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Add the Ethernet port 2-4 to aggregation group 1: TP-LINK(config)# interface range ethernet 2-4 TP-LINK(config-if)#link-aggregation 1 41