TP-Link TL-SG5412F TL-SG5428 V1 CLI Reference Guide - Page 213
lldp snmp-trap, lldp tlv-select
View all TP-Link TL-SG5412F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
lldp snmp-trap Description The lldp snmp-trap command is used to enable the ports' SNMP notification. If enabled, the port will notify the trap event to network management system. To disable this function, please use no lldp snmp-trap command. Syntax lldp snmp-trap no lldp snmp-trap Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Enable the ports' SNMP notification for port8: TP-LINK(config)# interface ethernet 8 TP-LINK(config-if)# lldp snmp-trap lldp tlv-select Description The lldp tlv-select command is used to configure TLVs to be included in outgoing LLDPDU. To exclude TLVs, please use no lldp tlv-select command. By default, All TLVs are included in outgoing LLDPDU. Syntax lldp tlv-select [port-description] [system-capability] [system-description] [system-name] [management-address] [port-vlan-id] [protocol-vlan-id] [vlan-name] [link-aggregation] [mac-phy] [max-frame-size] [power] [all] no lldp tlv-select [port-description] [system-capability] [system-description] [system-name] [management-address] [port-vlan-id] [protocol-vlan-id] [vlan-name] [link-aggregation] [mac-phy] [max-frame-size] [power] [all] Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Exclude "management-address" and "port-vlan-id" TLVs in LLDPDU outgoing from port 8: 201