TP-Link TL-SG5412F TL-SG5428 V1 CLI Reference Guide - Page 70
dhcp-snooping global
View all TP-Link TL-SG5412F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Example Enable the DHCP-snooping function globally: TP-LINK(config)# dhcp-snooping dhcp-snooping global Description The dhcp-snooping global command is used to configure the DHCP snooping globally. To restore to the default value, please use no dhcp-snooping global command. Syntax dhcp-snooping global [global-rate global-rate] [dec-threshold dec-threshold] [dec-rate dec-rate] no dhcp-snooping global Parameter global-rate -- The value to specify the maximum amount of DHCP messages that can be forwarded by the switch per second. The excessive massages will be discarded. The options are 0/10/20/30/40/50 (packet/second).By default, it is 0 standing for disable. dec-threshold --The value to specify the minimum transmission rate of the Decline packets to trigger the Decline protection for the specific port. The options are 0/5/10/15/20/25/30 (packet/second).By default, it is 0 standing for disable. Dec-rate --The value to specify the Decline Flow Control. The traffic flow of the corresponding port will be limited to be this value if the transmission rate of the Decline packets exceeds the Decline Threshold. The options are 5/10/15/20/25/30 (packet/second). By default, it is 5. Command Mode Global Configuration Mode Example Configure the Global Flow Control as 30pps, the Decline Threshold as 20 pps, and decline Flow Control as 20 pps for DHCP Snooping TP-LINK(config)# dhcp-snooping global global-rate 30 dec-threshold 20 dec-rate 20 58